MDL-7 Retaining Plate & Gaskets
£19.25
The MDL-Series dehumidifiers are thin flat membranes 2.3mm deep. The MDL-7 retaining plate is a 3mm thick ready drilled stainless-steel plate supplied with two gaskets and used for installing the membrane against a flat surface. Full instruction are in the MDL installation instructions.
Scroll down for associated products.
Read our documentation here
The MDL Series is a thin flat membrane dehumidifier 2.3mm deep and available in three models according to enclosure size. Volumes over 2m³ can be controlled using two or more membranes. A 3V dc current limiting power supply is required. MDL models are normally installed inside the enclosure.
| Small membrane comparison | PD4/PD5* | PD2/PD3** | RD3/RD4*** | RS1/RS2**** | MDL-3 | MDL-5 | MDL-7 |
|---|---|---|---|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
|
| Dehumidifying (grams/day) | 0.042 | 0.084 | 0.084 | 0.21 | 4 | 8 | 16 |
| Applicable volume | <1 litres | <2 litres | <2 litres | <5 litres | <0.5m3 | <1m3 | <2m3 |
| Element terminal voltage | 3V DC | 3V DC | 3V DC | 3V DC | 3V DC | 3V DC | 3V DC |
| Power consumption (W) | 0.06 | 0.08 | 0.08 | 0.22 | 2 | 3 | 4 |
| Dimensions (mm) | Ø 17 x 11 | Ø 17 x 11 | 30 x 24 x 5.5 | 21 x 28 x 13 5 | 96 x 63 x 2.3 | 96 x 88 x 2.3 | 116 x 108 x 2.3 |
| Weight (g) | 0.9 | 1.8 | 1.8 | 3.4 | 20 | 25 | 50 |
| Operating temperature | -10 to +50C | -10 to +50C | -10 to +50C | -10 to +50C | -10 to +50C | -10 to +50C | -10 to +50C |
| Notes | * Connector PD4 soldered PD5 push |
** Connector PD2 soldered PD3 push |
*** Mounting RD3 outside RD4 inside |
**** Connector RS1 Soldered RS2 Push |
Push connector with 50cm cable supplied |
Push connector with 50cm cable supplied |
Push connector with 50cm cable supplied |
Additional information
| Weight | 0.3 kg |
|---|---|
| Dimensions | 9.5 × 12.5 × 0.3 cm |
| Country of Origin | Japan |
| HS code | 84213925 |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.